Configuration steps

• How to calibrate and synchronize your Smart Wi-Fi TV Backlight via the Nexxt Home app.
• Open the App.
• Once the Smart Wi-Fi TV Backlight has successfully paired off with the application you will be directed to the "Device setup instructions" interface.
• Carefully read the onscreen instructions to ensure the device will be ready to start setup.
• Then tap "Next".
• Select the position where you started the installation of the device on the back of the TV, but as seen from the front side of the TV.
• In this example, the installation started on the bottom right corner.
• Tap "Nexxt".
• Now confirm whether the light strip was mounted following a clockwise or counterclockwise direction, also relative to the front side of the TV.
• Tap "Next".
• You will now see the oval shape of the TV as seen from the camera's perspective.
• Tap the 8 anchors or reference points on the image to confirm them one by one and add them to the calibration guide, as indicated below.
• When you’re done, tap "Next step".
• If you need to modify any anchor point you can touch it to delete it.
• Go to the Next Step.
• On the Screen Position Calibration interface, you will see an image of the TV screen from the camera viewpoint.
• Confirm the anchor points designated in the previous step by tapping the image in exactly the same places.
• Once the 8 anchor points have been confirmed, tap "Next".
• Now observe the demo of the calibration, that is, of the synchronization of TV content and backlighting effects.
• If the result is not satisfactory, return to the previous steps to reconfigure.
• If the backlighting effect synchronization is correct, then tap "Complete".
• Now, with calibration and syncing complete, you can start customizing other functions and features of your Smart Wi-Fi TV Backlight.
• With this, you have learned how to calibrate and synchronize your Smart Wi-Fi TV Backlight via the Nexxt Home app.