Configuration steps

• How to assemble the intelligent LED Floor Light from Nexxt Home.
• Make sure you have all the parts you need at hand:
  • Power adapter,
  • Controller,
  • LED light strip,
  • Grooved metal tubes,
  • Acrylic screens,
  • Mounting base,
  • Lamp legs,
  • Top end cover,
  • Allen wrench.
• First, fit the metal segments of the lamp structure together, coupling male with female.
• Feed the LED strip through the slot at the bottom of the tube and extend it along the entire length of the groove, all the way to the top edge.
• Now remove the blue adhesive strip while carefully fixing the LED strip along the channel, following a straight line from top to bottom.
• Assemble the four white acrylic shades onto the lamp, starting at the bottom.
• Fit each shade into the edge rails on the metal canal, gently pressing down until it clicks into place.
• Make sure that the joints of the shades exactly match those of the metal segments.
• Place the cover on top of the lamp.
• Carefully lay the tube on its side and screw the base to its bottom.
• The vertex of the base must end up on the side of the white screens, just below the cable outlet.
• Attach the legs of the lamp to the base and screw them firmly using the Allen key.
• Connect the LED strip and the controller through the 5-way male and female connectors, making sure the directional arrows on both ends point against each other.
• Plug the power adapter into the controller.
• Now place the lamp on the corner of your choice and plug it into a wall outlet.
• It is now ready to enter pairing mode.
• With this, you have learned how to assemble the intelligent LED Floor Light from Nexxt Home.